NDA Company
Sign upDeutsch

How to Make a Travis Scott Type Beat (+ Free Loops)

Updated 13 Oct 2026

Travis Scott
Travis Scott, photo from Spotify

A Travis Scott beat is a mood before it is a melody. The Houston rapper and his engineer Mike Dean, who has mixed every album since Rodeo in 2015, built a psychedelic trap world out of Kanye and Yeezus: reverb drenched guitars, dark choirs, a distorted 808 and vocals buried in Auto-Tune. A plugin like Scatch is almost built for these melodies, dark keys soaked in reverb. The two moves that matter are the atmosphere and the beat switch that flips a song halfway through.

The basics

Tempo129 to 141 BPM
TagsDark, Ambient, Virtual
Keyminor
Instrumentsguitar, choir and electric piano
Loops to start with

You do not need a finished beat to start. The Travis Scott loops sit in step 1 and again at the bottom, ready to play.

What BPM and key is a Travis Scott type beat?

Most loops run 129 to 141 BPM, with the bulk around 140. The drums often read in half time, so it feels slower and heavier than the number.

The key is mostly minor and dark. Take the key from your loop and put the 808 and the melody on the same root.

How to make a Travis Scott type beat in 6 steps

The loops in step 1 stream right here and the mp3 is free. Then work through the six steps.

  1. 1Pick a sample
    A dark, atmospheric guitar or choir in minor, 129 to 141 BPM. Grab a loop from the list below, one that already feels cinematic before any drums.
    • ▶
      Maiskolben
      140 BPM · Bmin
      DarkHardSimple
      @ndacompany
      ↓
    • ▶
      Nasty
      140 BPM · Cmin
      DarkHardVirtual
      @ndacompany
      ↓
    • ▶
      Malan
      138 BPM · Gmin
      AmbientEpianoHappy
      @ndacompany
      ↓
    • ▶
      Quick
      140 BPM · Cmin
      AmbientChoirEpiano
      @ndacompany
      ↓
    • ▶
      Kxst
      140 BPM · Amin
      AmbientHappySynth
      @ndacompany
      ↓
  2. 2Lay the 808
    Distorted and round. Set it to cut itself, then clip and saturate it, a plugin like Decapitator drives it without getting muddy.
  3. 3Hi-hats on top
    Trap triplet rolls, but leave gaps, and throw a ping-pong delay on the open hat for width. The space is what makes it feel huge, so do not fill every sixteenth.
  4. 4Add the atmosphere
    Throw the loop into a long reverb, drop in a reverse swell or a pad from a plugin like Scatch, and automate it so the beat breathes between the drums.
  5. 5Leave room for ad-libs
    Travis layers vocals and ad-libs in the gaps, so mute a bar of melody here and there and drop a vocal one-shot from a pack like Exhale to make space.
  6. 6Arrange with a switch
    Hook early, then flip the beat halfway, a new chord, a key change or a different drum feel, building into it with a rising delay, so the track turns into a second song.

The atmosphere, the Mike Dean psychedelic layer

The signature is space. A long reverb on the melody, a low synth drone under it and reverse swells going into each section turn a plain loop into a Travis world, and a granular effect like Portal adds movement on top.

Mike Dean is famous for the synth and organ washes that sit under the beat. Hold one dark pad through the whole track at low volume for that glue.

Keep the melody dry and loud, the atmosphere wet and quiet, and high-pass the melody group so the distorted 808 owns the low end. The contrast is what reads as psychedelic trap.

Two quick tricks fill out the world: render the keys reversed, cut at each chord change, for a backwards swell into a section, and pitch a bell up an octave and double-time it, since Travis beats are full of bells.

The beat switch

Travis songs rarely stay one beat. Halfway through, the drums drop, a new chord or key comes in and the second half feels like a different track.

Build the switch around a transition: a reverse crash, a filtered riser or a bar of just vocals and reverb before the new section hits.

A reliable way to sell it is a tempo-synced delay on the last melody before the flip. Push the feedback up and automate the wet level, bring it up into the turnaround, then cut it dead so the tension releases into the new section. Starting the intro on a completely different, lighter melody also keeps the drop from being expected.

You do not need two full beats. A key change, a new 808 pattern or a stripped drum feel is enough to sell the flip.

Pitch the sample up and down

The position of the loop is not fixed. A few semitones change the whole mood.

Up the guitar gets brighter and thinner, down it gets heavier and darker, which suits the psychedelic lane.

The key moves with it, so pull the 808 to the new root afterwards.

Common mistakes

A dry beat. Travis lives on reverb and atmosphere, so a clean loop with no wash sounds flat next to the real thing.

Busy drums with no gaps. The space between the hats and the 808 is where the mood sits, so leave room.

One flat section for the whole song. Add a beat switch or at least a key change, the flip is part of the style.

Using the loops from NDA Company

Every loop here is played by hand, no AI, and free as an mp3.

Loops to start with

  • ▶
    Maiskolben
    140 BPM · Bmin
    DarkHardSimple
    @ndacompany
    ↓
  • ▶
    Nasty
    140 BPM · Cmin
    DarkHardVirtual
    @ndacompany
    ↓
  • ▶
    Malan
    138 BPM · Gmin
    AmbientEpianoHappy
    @ndacompany
    ↓
  • ▶
    Quick
    140 BPM · Cmin
    AmbientChoirEpiano
    @ndacompany
    ↓
  • ▶
    Kxst
    140 BPM · Amin
    AmbientHappySynth
    @ndacompany
    ↓
Start now

Pick a loop and drag it into your DAW. 808 under it, clap on top, your first Travis Scott beat is running.

All Travis Scott loops

BPM and key of the Travis Scott loops

Tempo and key of the Travis Scott loops from this guide, straight from our catalog.

LoopBPMKey
Maiskolben140Bmin
Nasty140Cmin
Malan138Gmin
Quick140Cmin
Kxst140Amin
Wobble140A#min
Opulent140G#min
Strato140D#min
Entdeckung + C# flp140Cmin
Graduate130Amin

Free Travis Scott loops to start with

17+ Free Loops

+ 7 more Travis Scott loops

See all Travis Scott loops

Browse all Artists & Genres

Travis Scott Type Loops

More guides: How to Make a Rod Wave Type Beat (+ Free Loops) · How to Make a Gunna Type Beat (+ Free Loops) · How to Make a Ken Carson Type Beat (+ Free Loops) · How to Make a Future Type Beat (+ Free Loops) · How to Make a Yeat Type Beat (+ Free Loops) · How to Make a Drake Type Beat (+ Free Loops) · How to Make a Dark Type Beat (+ Free Loops) · How to Make a Sean Paul Type Beat (+ Free Loops) · How to Make a Popcaan Type Beat (+ Free Loops) · How to Make a Offset Type Beat (+ Free Loops)

FAQ

What BPM is a Travis Scott type beat?

129 to 141 BPM, the bulk around 140, usually with half time drums that feel slower.

What key is a Travis Scott type beat in?

Mostly dark minor. Take the key from your loop.

What makes a beat sound like Travis Scott?

The atmosphere and the beat switch. Reverb drenched guitars or choir, a distorted 808 and a flip halfway through the song.

What instruments do I need?

For the melody a dark guitar, choir or electric piano, or a plugin like Scatch, under it a distorted 808, trap hats, a clap and a long reverb or pad.

Can I pitch the loop?

Yes. A few semitones change the mood and the key, then move the 808 to the new root.

Can I use your loops for free?

Yes, every loop is a free mp3. Not royalty-free: a commercial release means a 50/50 split with NDA Company.

They are not royalty-free. Free in your own beats; a 50/50 publishing split with NDA Company applies to every commercial release. License Terms

About NDA · All Artists & Genres · Free Loop Kits · Guides